In some complicated environments such as nighttime, indoors, hotels, cars, elevators, etc., in order to take beautiful pictures, you need to use the lights reasonably. The following describes how to fill light in several environments photography shooting.
1. Character interview design
Interviews are usually in offices, residences, hotels, etc. At this time, the environment is more complicated. The traditional light pulls the power cord inconveniently, the power is large, and the space is occupied, which will cost your precious time and resources. The following is a brief introduction to the method of lighting with high-efficiency LED photography lights: this type of interview ambient light is generally based on 5600K color temperature, so we have to choose two or three LED photography lights, the color temperature of the lamp head is 5600K. When lighting, pay attention to make full use of the natural light outside the window. It may become your main light, or it may become contour light. Use PL-68 with built-in battery to make other light. In addition, it should be combined with the scene light to construct the main light, auxiliary light and contour light. Through these treatments, the on-site illumination can be increased by 300---800 LUX, and a perfect lighting environment is presented in front of your eyes.
2, news shooting fill light instructions
In most of the news shooting environments, in addition to the special lighting environment, in theory all need to fill light. These under-light lenses can be seen in the news programs of various TV stations every day. In fact, the fill light in the news shooting is very simple. According to the lightness and long battery life of the camlight photography light, as long as it is attached to the nose, it is opened. The camera can turn the lights on simultaneously, which is very convenient to use. The vast majority of the shooting environment is at 5600K color temperature, the angle of the lamp head is 45 degrees, and the illumination can be increased by 150-300 LUX two meters away from the object. When you use the lamp to take a few news, you will find that there is no fill light. The picture is really inferior. In fact, the difference between these hundreds of LUX, with gvm led video lights for a small range of photography fill light, the picture has been greatly improved!
3, small scene shooting fill light instructions
LED came light photography lights also have one of the most extreme applications. Many film and television dramas are inseparable from the lens inside the car. The lighting of the car scene has always been the biggest headache for the lighting designer, according to the. In practical application, solves the problem of studio lighting when the car stops and travels. The method is to use the camera's special hose bracket with suction cup to on the window glass and adjust the brightness as needed. And angles; in fact, camlight photography lights have a lot of excellent performance in a small environment, such as in the elevator, these are the essential shooting locations for modern drama. Of course, in a large shooting environment, the light is also suitable for detailed drawing.
In the shooting of the characters, the use of camlight photography lights plus soft mask, the effect is very good: adjustable brightness, good color rendering, can draw details such as the eyes of the characters. Appropriate addition of the auxiliary light source can make a better image of the character, which adds new and operable technical conditions to the art of photography.
In film and television lighting and photographic lighting, the basic technical requirements are the same, but there are different requirements in specific occasions. For example, photography is a picture work that is much more subtle than TV shooting. Especially the lighting of points and lines, using modern lighting technology, the shooting effect will be greatly improved, but the TV image has entered the high-definition era, so the lighting requirements have also increased.